Motor Housing Hanger Type Shot Blaster Put into Use

The coal mining environment is relatively harsh, and the requirements for motors are relatively high. In order to extend the service life of motors, it is necessary to add blast cleaning process in the production process, to remove surface rust, oxide skin, paint skin, etc., thereby improving its surface quality and increasing adhesion.

The customer has chosen a hanger type shot blasting machine to clean the moto housing, and the size of the shot blasting chamber of this equipment is φ30000× 1000mm, with a load-bearing capacity of 10000kg and 5 high-efficiency blast turbines, efficiently achieved the output required by the customer.

Operating procedures

The operator must be familiar with it to avoid the occurrence of shot blasting machine malfunctions and accidents.

1. Dust removal system on;

2. The hook is used to install workpieces outdoors;

3. The hook enters the room and stops running;

4. The door is closed, and the hook begins to rotate;

5. Elevator on;

6. Blast turbines on;

7. The gate of the feeding system is opened, and blast cleaning begins;

8. After cleaning, the shot blasting machine stops and the gate of the shot supply system is closed;

9. Hook rotation stops;

10. The elevator stops (if cleaning continues, it can be left on);

11. The door opens and the hook opens to unload the goods outdoors;

12. The dust removal system stops (if cleaning continues, it can be left on).

ETSA group is a professional shot blasting machine supplier in China. It has high-quality machines, professional after-sales service, and more than 25 years of export experience. If you want a good-quality and efficient blasting machine, please leave your processing needs. We will recommend you the appropriate machine according to your needs.